Share your CCIE v5 Written Experience

also please answer this :

Q270 . Which three statements correctly describe the encoding used NETCONF and RESTCONF ?

A.RESTCONF uses JSON-encoded data
B.NETCONF used XML-encoded data
C.NETCONF used YAML-encoded data
D.RESTCONF uses XML-encoded data
E.NETCONF used JSON-encoded data
F.RESTCONF uses YAML-encoded data

luks like call-center guys in full swing advertising.

Atleast they are not misleading to download a free pdf and tell to pay.

If it is free , they post it on their forum.

If you want the dump with update , you have to purchase it.

So whats good ?

@Maria Daline, it is asking me the decryption key what is the decryption key can you email me

derryldarkhouse at gmail.com replace at with @ and remove space please help.

Which two statements about root guard are true? (Choose two)
A. It allows unknown devices to participate in STP
B. It automatically re-enables blocked ports
C. It requires the administrator to manually re-enable ports that have been blocked
D. It supports the errdisable-timeout command
E. It automatically error-disables a port when PortFast is enabled
F. It blocks BPDUs from unknown devices

please share a availed dumb

@pas: when you are planning for the exam

If anybody know about cciein8weeks website for R&S pls late me know. Is it effective or not?

Q16
Refer to the exhibit. Which option is the state of the OSPF adjacency between routers R1 and R2?
A.EXCHANGE
B.LOADING
C.ATTEMPT
D.2 WAY
E.FULL

please answer

If anybody know about cciein8weeks website for R&S written exam. pls late me know. Is it effective or not?

Guys,

Someone could share the written exam for 400-151 v2.1 (CCIE DC Written)?

Please

i here their are update CCIE R&S dumb today with 195q please could you share it .

which routing protocol type prevents routing loops by recording each autonomous system that a route traverses?
a. Path-vector routing (Correct answer in my opnion)
b. Link-state routing
c. Distance-vector routing
d. Hybrid routing (Correct answer from 299Q)

Am I correctly ?

plz anyone have update ccie 400-101 dump share it at 11f8047 at gmail.com

If Hybrid routing is EIGRP , correct Answer : d

@d123 but question says “prevents routing loops by recording each autonomous system that a route traverses” for me this is BGP and it uses Path-vector routing.

————————-
which routing protocol type prevents routing loops by recording each autonomous system that a route traverses?
a. Path-vector routing (Correct answer in my opnion)
b. Link-state routing
c. Distance-vector routing
d. Hybrid routing (Correct answer from 299Q.

——————————–

Path Vector is 100% right. BGP routes travel through ASs. EIGPR routes do not travel through other ASs

@Help1, can you share your 229q? thanks in advance

Is the 299q valid?

Elisabette Ariny, I have some thoughts about these questions and others. Please give me your email or write me henry135 at yandex.ru. There is too much spam on this forum.

GUys, can any one send correct link, have to write exam in two days

Which MLD message type does a host send to join multicast groups?
A. Join/Prune
B. Done
C. Hello
D. Query
E. Assert
F. Report

Answer: F

However the IEEE RFC Document says the following under 3.6. Multicast Address

¨ In a Report or Done message, the Multicast Address field holds a
specific IPv6 multicast address to which the message sender is
listening or is ceasing to listen, respectively.¨

So basically Done or Report are a proper answer.

Anyone can elaborate on this?

QUESTION 4
How long will the raoot bridge continue to send configuration BPDUs to notify all bridges to age out their MAC
address tables?
A. The forward delay + max-age time
B. The forward delay time
C. Three times the hello interval
D. The max-age time
Correct Answer: A
Section: (none)
Explaadwnation
Explanation/Reference:
QUESTION 5
Which two methods can you use to lemit the range for EIGRP queries? ( Choose two )
A. Configure stub routers in the EIGRP domain
B. Use an access list to deny the multicass address 224.0.0.1 outbound from select EIGRP neighbor and
permit everything else
C. Use an access list to deny the multicass address 224.0.0.10 outbound from select EIGRP neighbors and
permit everything else
D. Summarize routes at the boundary routers of the EIGRP domain
E. Configure route tagging for all EIGRP routes
F. Configure uascfnicass EIGRP on all routers in the EIGRP domain
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 6
Which two options are purposes of MSDP SA filtering? ( Choose two )
A. To reduce the number of multicast address that are distributed to other devices in the same multicast
domain
B. To allow the filtering of PIM messages between peers
C. To improve the scalability of an MSDP multicast environment.
D. Allow the filtering of IGMP messages between peers
E. To allow all sadSA messagsfes to be processed by MSDP peers
F. To reduce the number of multicast address that are shared to MSDP peers.
Correct Answer: CF
Section: (none)
Explanation
Explanation/Reference:
QUESTION 7
Which two factors contribute to traffic starvation when TCP and UDP flows are included in a single traffic
class? ( choose two )
A. TCP flows continually lower their transmission rates when congestion occurs on a link
B. UDP flows continually lower their transmission rates when congestion is detected
C. UDP flows continually reduce sfathe window size when congrestion occurs on a link
D. TCP flows maintain a consistent transmission rate when congestion occurs on a link
E. UDP flowads maintain a consistent transmission rate when congestion occurs on a link
F. TCP flows continually reduce the window size when congestion occurs on a link
Correct Answer: AE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 8
Which options is the implicit access rule for IPv6 ACLs?
A. Permit all ICMPax, deny everything else
B. Permit all
C. Permit neighbor discovery, deny everything else
D. Deny all
Correct Answer: C

So much spam on here nowadays 🙁

I think that the answer F is correct:

From “IP Routing on Cisco IOS, IOS XE, and IOS XR” book
1. MLDv1 will send a report (join) using the target multicast group address
2. Done (leaves)
3. The query message determines whether there are any remaining active listeners for the specific group.

Hi James LeDuc,

Congrats, can you sure your PassLeader 195q + 122q? thanks in advance

Hi Folks,
can anyone share some source of valid dumps?

Please someone help with the correct link to download dumps.. all these links are spams. Thanks

Can you plz send latest dumps adnandaudz AT gmail Dot com

@Evelyn, the file from your link is just a one page file (cover page)

I did contact them
299 USD for the dump with 7 days update.
Only people who can afford to pay for dump + pay for test will go for it.

Looking how people are failing it is better to invest in the dump then failing back to back and loosing more money and time and mind.

Has anyone else taken CCIE 400-101? and if so please advise your experience.

anyone here who is taking a ccie Lab?

I Passed lab the CCIE RSv5 Lab , Thank you all

TT1
port-security : add maximum 2

TT2
Server1 to 8.8.8.8 via R14 : next-hope-self missed

TT3
load balancing : add in sw110 vl 2000 or 2001 in ospf process ; There was also a loopback on the wrong ospf process
i also advertise the ebgp link on R12/R13 because DC1 switches doesn’t choose R12 path to go to DC2, it was going towards ISP 19999 , Coreected metric on RM

TT4
pre-best path configured =>change the prefix-list in the route-map (deny 10.4.0.0); i don’t remember if there was another fault or not
requirement to not change bgp attribute

TT5
dmvpn ipsec config in R60 was wrong

TT6
add on vlan 2001 the dhcpv6 pool

TT7
mpls ticket really tricky ! if i remember correctly it was like this
R51 is doing ospf over dmvpn in process 1 area 0
R51 is doing ospf in internal with process 10 area 0
Both R50 and R51 are generating a default in ospf + R50 advertise in bgp the summary only 10.5.0.0/16
trace is requested from SW500 (at the right) to server 1 and when mpls is down must use dmvpn from both sides
Faults corrected : mpls ldp password in R3, add metric-type 1 in the default originate in R51 =>SW500 chooses the default and all was ok but no backup

TT8
user3 ping R30 loopback : no dhcp snooping or arp inspection problem !!! just correct the default router in dhcp pool on R30! i lost a lot of time in this but the solution is really simple

TT9
telnet from R71 to server2 but when doing the sh users must show 10.7.0.2 : don’t match the output, modify acl on vty in server2 so i don’t do it

TT10
add the nat outside command on R25 to match the output (sh users)

diag TCL/DHCP , no changes

H2+ config : no change from what we know,

Lab: H2+: Nothing special same as WB or what the latest updates are available. Skipped DHCP snooping question.

IMPORTANT: It is really important to double check preconfiguration in LAB.

vlan999 is configured on trunk interfaces so best way is to set to default, no need to check what is already configured.

65001 is all preconfigured with ospf but almost everywhere BGP/OSPF/EIGRP/LDP the loopback is either not advertised or router-id is not set.

VRFs are only configured in Jamesons but no RD. Jacobs has no VRF configured and some interface IPs are incorrect so please pay attention.

TTL question required not to use deny statement.

if you have specific questions i will try to answer : {email not allowed}

hi Anonymous
your email address is not valid
share the right one
i tried to contact you but failed

congratulation free dump

Hello all can anyone send to me ccie study guide this is may mail endstep1 @ gmail.com

Please send me a current version of the lab workbook

D-1ve26uic*maildrop.cc (replace the * with an @)

famisraj,
how did you do the TTL without the deny statements?
thanks,

hi
i need this books .. if anybody has plz share it.

programming and automating cisco networks –

http://www.ciscopress.com/store/programming-and-automating-cisco-networks-a-guide-to-9780134436784

Network Programmability and Automation
http://shop.oreilly.com/product/0636920042082.do

@Rocky… For Network Programmability and Automation:

https://mega.nz/#!dwlhmQQQ!0BarVWM-Ug-RizuLETwhWiokHESR8DC3XMdmiTDQo7k

Sheri, what was your solution for TTL question?

Hello guys,
may I as some questions?
For those who have been already take CCIE R&S written,
is there any lab in the exam or just
multiple choice and drag and drop?
Please share with me.
Thanks.

Hi Daniel, Could you please share your emailID

Hi,

I want to prepare for CCIE R&S theory exam. Can anyone please guide me in the right direction for study material?

Also, has one got upto date Dumps? my email is qasim02(@)gmail.com

i will really appreciate your help with this.

kind regards.
Qasim

Anyone have the Lab workbooks they can Share?

D-1ve26uic @ maildrop.cc

can anyone send me last dump? please udulu_1 @ yahoo.com

Pass today with 950 Point. Only 5 new questions: 1 D&N about FIB and CEF, 4 multichoices

@Smeb1993, can you please share your dumps with me? my email is qasim02 (@) gmail.com. thanks in advance.

Check your email 😀