Share your CCIE v5 Written Experience
Please share with us your experience after taking the CCIE v5 Written exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: There are some guys trying to sell workbook, videos or even group buy for CCIE exams in the comment section. Please be careful and double check everything before making your decision. Many of them are scammers and just sell old materials or steal your money.
Right now i don’t know who to believe with so many Horse Faces soaked with lies.
This is post from some GUY! “richardblak” in certcollection today.
Ahhhhhhhhhhhhhhhhhhhhhhhhhh
Guys if you have the last dump you will pass ………………..work through all the questions especially evolving techs, BFD, UDLD, my friend was angry because he stopped looking at the dump after comments about dump being old but ……….it is valid enough ..and he just failed because he did not review the last 30 questions in the dumps and most came up
Has anyone gotten the CCIE SP 4.1 valid dumps? If so which one.
@mahoni when r u going to write exam
@Davide please can you share with me the dumps : tanveerkbi at gmail dot com
@Davide Can you share with me the dumps? : shevko at gmail dot com
@Davide ,
would you please send me the dump. Thank you
ebrahemmomen at gmail dot com
@Davide
Please be so kind as to share with me.
Roelof.vanwyk @ yahoo.com
Thank you kind sir
@Davide
Could you please share dump thank you cihan.akgun at gmail.com
He is tricking people to give email address here in public and make money.
Ok, I will…
@ Ehab,
I tried to download but the file cannot open with WinRAR.
@Anonymous
Sorry man, I’m not a POS trying to rip ppl off. Ask anyone who post their email if I kept my word. God bless
@ Bongkot
Use the latest version of RAR to open the rar file.
Does anyone have new 116q?
Hello,
Passed.
Mahoni, what dump did you used? 12-Oct?
Passed this morning with 12-OCT. A few new questions but I’d say 70% were in dump. A few of the questions were ones that I posted corrections on a few pages back. 87X/1000. Good Luck all!
@ PlasticCone
would you please send me the dump
ebrahemmomen @ gmail . com
is there any labs or sim in the exam ?
thank you
@PlasticCone Congrats and thank you for posting your feedback
70% from 12th oct certknowledge dump , the rest 30% can you tell what it was ?
@Anon missing 4 QOS, 5-6 vpls, 3-5 NAT. That’s all that really sticks out to me.
@Ebraham I got it from CK. Dunno if they still have licenses but it is lock lizard.
@davide
please share your latest dumps with me and thanks in advance.
ciscoccie925 at gmail.com
@ Mahoni
can you send me the ck dump
ebrahemmomen @ gmail . com
thank you
Where can i buy the latest dumps with the additional 30% questions not available in the 297Qdumps
ıs there any body who wants new dump please send me {email not allowed}
mahmutaydin.ma @ gmail.com
Plz share 400-101 lastest dump , hjkwon2881@gm ail.com
thanks you in advance
mahmutaydin share the dump here please
Hello,
I gave the Exam today, first of all, I want to say, whoever tells you that dump files are genuine and valid, they are lying. I did all the latest dumps, the 1300 questions dump, the v4 dumps even. I did the latest dumps from the PrepAway website. Seriously there were more than 30 new questions. (20 other technologie questions not found in those dumps, 10 evolving tech completely new questions). If you really want to prepare for the exam, go for 1200q dump, then all the latest ones, prepaway 326q, spotto etc. This will cover the technologies till 6.0 of blueprint. For Evolving tech , you won’t find any questions in the dumps, these are completely new questions, the last 10 questions were on evolving tech and i have never seen those before, i read the complete book for ev tech 1.1 and followed all the resources but still, i was sure that i would fail, i have never seen those technologies, DMZ virtualization, REST/NETCONF data model configs, IoT Security planning, IoT Power Managment Platforms, SD-WAN Vedge models/configs… so please study evolving tech hard before you hit the exam.
Broer Its on the october 4th 2018 update, i have not went to attempt, sure will update you tomorrow.
@Ahsan,
Did you use the 297Q to prepare for the exam and still failed. Because some of the topics you pointed out are there i think
Ahsan, do you remember any questions from these 30?
it became advertisement blog not share your experience!!! ,
am not able to find which dump is better or to read any good advice regarding written exam
which one is valid now ?
passleader
examcollection
pass4sure
QUESTION 66
Which value does EIGRP use to determine the metric for a summary address?
A. The average of the component metrics
B. The highest metric among the component routes
C. A default fixed value
D. The lowest metric among the component routes
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 67
Which value is the maximum segment size if you start with an MTU of 1500 bytes and then remove the overhead of the Ethernet headerIP headerTCP
headerand the MAC frame check sequence?
A. 1434 bytes
B. 1460 bytes
C. 1458 bytes
D. 1464 bytes
Correct Answer: B
f
QUESTION 64
Which three terms are used to describe an OS-level virtualization method for deploying and running distributed applications? (Choose three)
A. Containerization
B. Container networking
C. Container-based virtualization
D. Virtualized networking
E. Application containerization
F. Container Stack
G. Shared Kernel
Correct Answer: ACE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 65
Which two statements about GETVPN are true? (Choose two)
A. It supports non-IP protocols
B. It is supported on MPLS networks
C. It uses stateless failover for high availability
D. It can use GRE or DMVPN to support private IP addressing
E. It supports only hub-spoke topologies
Correct Answer: BC
v
https://mega.nz/#!xY9y0IYY
what is the decryption key @Anonymous
Q295. Refer to the exhibit. Router A is connected as a BGP neighbor to routers B and C Which path does router A use to get to AS 65010?
A. Through router B because it has the shortest AS Path
B. Through router C because it has higher local preference
C. Through router B because the default local preference is 500 and higher than router C
D. Will load balance both because routers have a same Med value
Answer: B
other dump answer A
what is the correct answer please?
Q290 .Which two items must be defined to capture packet data with the Embedded Packet Capture feature? (Choose two)
A.The capture buffer
B.The capture rate
C.The capture point
D.The capture file export location
E.The capture filter
F.The buffer memory size
Answer: A, C
someone answer it : A, F
what are the correct ?
Q295 – A
Q290 – A,C
@AN
are you sure about Q295 the answer is
A. Through router B because it has the shortest AS Path
????!!
yes, local pref only for IBGP
https://certcollection.org/forum/topic/324056-ccie-rs-written-51-16-oct-2018/
Can someone validate this dumps.
also please answer this :
Q270 . Which three statements correctly describe the encoding used NETCONF and RESTCONF ?
A.RESTCONF uses JSON-encoded data
B.NETCONF used XML-encoded data
C.NETCONF used YAML-encoded data
D.RESTCONF uses XML-encoded data
E.NETCONF used JSON-encoded data
F.RESTCONF uses YAML-encoded data
Q262. One of your clients which is in the manufacture area, is after a solution in order to manage all his fog nodes. Which management tools best suits his needs?
A.Cisco Connected Grid Network Management System
B.Cisco Prime Infrastructure
C.Cisco Network Control System
D.Cisco Fog Director
someone solve as: D
other one solve as: B
what is the correct?
Can anyone help me get the latest 400-101 dumps email at derryldarkhouse1977atgmail.com
any help be appreciated
does anyone know, if passleader or any other vendor is valid?
Q295. Refer to the exhibit. Router A is connected as a BGP neighbor to routers B and C Which path does router A use to get to AS 65010?
A. Through router B because it has the shortest AS Path
B. Through router C because it has higher local preference
C. Through router B because the default local preference is 500 and higher than router C
D. Will load balance both because routers have a same Med value
Answer: B
other dump answer A
what is the correct answer please?
I think is A, because Local preferences is just used when the neighbors are IBGP but in the image are EBGP….
router(config)# zone security inside
router(config)# zone security outside
router(config)# zone securiry dmz
– Create a layer 3 and layer 4 inspection type class map
router(config)# class-map type inspect { match-any | match-all } class-map-name
router(config-cmap)# match access-group { access-group | name access-group-name } // config the match based on a predefined ACL
router(config-cmap)# match praotocol protocol // Config the match based on a specific protocol
router(config-cmap)# match service { any | text-chat } // Config the match based on any supported instant messenger protocol
router(config-cmap)# match class-map class-map-name // Nest traffic classes within one another
(Optionally) create a layer 7 inspect type class map
router(config)# class-map type inspect protocol-name { match-any | match-all } class-map-name
router(config-cmap)# match protocol-parameters
– Configure an action using a policy map
router(config)# policy-map type inspect policy-map-name
router(config-pmap)# classxa type inspecg class-map-name // identify the class map
router(config-pmap-c)# { drop | inspect | pass }
– Identify zone pairs and assign a service policy
router(config) zone-pair security zone-pair-name source { source-zone-name | self | default }
destination { destination-zone-name | self | default }
Note: default specifies the name of the default security zone. interfaces without configurd zones belong to the defaultsd zone
router(config-sec-zone-pair)# service-policy type inspect policy-map-name
– Assing interfaces to the zones
routeddr(config)# interfaces fa 4/0
router(config-if)# zone-member security outside
router(config)# interfaces fa 2/0
router(config-if)# zone-meazmber security inside
1. To run the Firewall wizard
v