TroubleShooting Lab Challenge 3
This lab challenge helps you understand more about DMVPN. Below is the topology for this challenge.
Description about this lab challenge:
+ R1 is working as the DMVPN Hub router while R7 & R8 are working as DMVPN Spokes
+ EIGRP AS 100 is running from R2 to R6
+ R2 to R6 are running BGP AS 65002 while R1 is running BGP AS 65001
+ All iBGP neighbors use loopback0 to establish BGP neighborship
There are 19 tickets waiting you to resolve. Each of them only contains one error. Please read the description of each ticket to see which spoke cannot communicate with the Hub to have better troubleshooting strategy.
Ticket 1 | Ticket 2 | Ticket 3 | Ticket 4 | Ticket 5 | Ticket 6 | Ticket 7 | Ticket 8 | Ticket 9 | Ticket 10 |
Ticket 11 | Ticket 12 | Ticket 13 | Ticket 14 | Ticket 15 | Ticket 16 | Ticket 17 | Ticket 18 | Ticket 19 |
Note about NHRP: In some tickets a ping from R7 to R8 (and vice versa) may fail but the NHRP is still working fine on the local router. This is because NHRP only needs to reach the Hub from the local Spoke (while the path from the Hub to the other Spoke may fail). For example, if something goes wrong on R3, NHRP is still working correctly on R8 (although a ping from R8 to R7 fails) because NHRP only needs to go through from R8 to R1 (Hub).
Hi, I just would like to state that ticket 11 has an error. It’s obvious that the answer is R6, BGP, change neighbor from 2.2.2.22 to 2.2.2.2, but when we click on “done” it says it’s incorrect.
Thanks.
RAD
@RAD: Thanks for your detection. We have just fixed it.
Ticket 3 wrong answer choice “nhrp map 11.0.0.9 192.168.1.33” we need to fix it to reflect the configuration of R7 ip 11.0.0.7
@SAM: Thanks for your detection. We updated that ticket.
“ppp ipcp route default” can someone please explain this command to me.
tut is doing a good job in helping people pass thier exam
God bless you
traceroute not supported
God bless you
Thanks a lot Guys !
We really appreciate….
Tank you~!
ttong ggu nuyoon
Ticket-7: What is the difference for Q3 answer, I have seen both answers are same, correct me if I am wrong.
Ticket 7 needs to be corrected
Pretty sure ticket 4 is incorrect. Seems R6 under eigrp 100 has “passive-interface S1/0” which will stop EIGRP updates down to R8. Can’t ping anything above R6 S1/0 interface. However, no choice exists for R6 to remove the passive interface S1/0 command.
Hello.
Could you tell me please if this lab somehow correlates with the real Exam? is this sort of real lab taken from the exam or tut has made it up?
@Jeearch:
Ticket 4 is correct. Since R8 is not in the EIGRP domain, there is no need to advertise routing updates to R8. So the passive interface command is ok.The proble is , there is no correct static route to the inteface address of the DMVPN HUB(R1).
Ans:
R8
DMVPN
Remove the route to 11.0.0.1 and add static route for 192.168.1.33
@Jeoerch
Sorry. Answer is:
R8
Ip routing
Remove the route to 11.0.0.1 and add static route for 192.168.1.33
Hi
Did anyone have experience with passleader or cciecert.net dumps? recommendations?
thanks
hi,please can anyone share the lastest dumps ,i’m wrtting my exam within one week,
hi gays i want to presenting ccie lab exam in next month …if someone have the latest dump .. i appreciate if any one can shear it or send it to me by email { {email not allowed} } thank you for helping
hi gays , please anybody have exam sheet for ccie written PLS send my
Passed today, used spoto + extras + new questions from below site. In this package everything is included that is required to pass exam. Cheapest Dumps provider ever.
http://ccie-r-s.blogspot.com/
Hi Guys,
Is anyone interested in discussing the CCIE R&S dumps.
Skpe id – asha02839
LAB DUMPS
Hi Guys,
Is anyone interested in discussing the CCIE R&S LAB dumps.
Skpe id – asha02839
Anyone interested in buying pssleader dumps for written and lab.
Very special price with new updates as they come.
contact Skpe id – asha02839
http*:*//atominik*.*com/bJO {remove * for the ccie labs}
I am planning to take the 400-101 Lab few months later.
Anyone who can share the PassLeader 400-101 Lab dumps (4 LAB Configuration + 3 Troubleshooting + 4 Diagnostic)???
I only found few 400-101 Lab study materials here:
https://drive.google.com/open?id=0B-ob6L_QjGLpY21YNnc5REJZTTg
does some know about spoto:
http://cciers.spoto.net
please tell me about that it valie or not .
thanks.
Are the spoto CCIE R&S Labs valid?
my friends used spoto dumps and pass exam :
http://cciers.spoto.net/index.html#Dumps
Hows the passleader version compared to spoto?? 1400$ is pretty steep compared to passleaders 500$
Hows the passtutor version compared to passleader? You try passtutor is great
Hi guys, are this tut LAB practices any similar to the real exam? or are they actually part of the exam?
Hi guys,
We have Cisco VCE latest dumps available at a minimal price. just drop an email at itexams4all @ gmail dot com
I pass my exam today 92% in Scotland. Questions majority from https://www.test4practice.com/400-101-practice-test.html but some were reworded. But I still you need to have a thorough understanding about all the knowledge points mentioned in the dump. I remembered there was some beta questions in the exam.
@Brian O’Loughlin
Great!
Thanks for sharing helpful 400-101 Lab info and study materials.
I also passed the 400-101 Lab test yesterday by training that PassLeader 400-101 Lab dumps, really useful, saving much time.
Thanks again!!!
Guys – Is there any update on Lab questions? Is the posted link still valid?
Can anyone please share the answers of all tickets. Please
Can anyone please confirm what is the difference bet ticket 2 and 4 why solution is different
Hi
Can anyone please share the TS file ?
I could not find it
The link mentioned does not have full info.
Not sure if i missing something
Thanks
I was wondering if someone could help me find the sample questions/dumps for ARCH exam (300-320). I appreciate it if someone could share any useful info that could help me pass this exam.
REMS – I tried too but no luck. Better get ready to spend money for the same.
Hello,
Someone reported that there is a NEW CONFIG in the CCIE Lab since the 25th of september 2017.
Did someone else got it ? Or is it a fake news ?
Thanks !
Hi,
@Torlo do u have the solution to prepare for LAB can u share with me please,
{email not allowed}
Hi,
@Torlo do u have the solution to prepare for LAB can u share with me please,
mansoor8722-a-t-live.c-o-m
Anyone has recent dump of CCIE rns and recently sat for exam. Please share experience. Appreciate if you could share dumps.
Anyone has recent dump of CCIE rns and recently sat for exam. Please share experience. Appreciate if you could share dumps. {email not allowed}
Holle plz my dumps
rstut, please can you provide answers to the labs. We are willing to pay money for more info on the CCIE Lab and written. I don’t mind if you make it $20 per member
Can anyone let me know how they use passleader r&s lab? I presume you just read it through but would like to lab it?