Share your CCIE v5 Written Experience

@Karen Saa

747Q+206Q dumps are not valid and enough to pass exam. We need to 335Q dump. Everywhere scammers and ask charge 250$.

Thanks

Anyone with CCIE study materilas. smartask_luv at yahoo.com

any one need the CCIE routing and switching dumps.

email me.: shahzad.khan396 at yahoo . com

ı didn take dump , could u share again please

https ://mega.nz/ #F!ubRilbJb!9Y_VdeFNYicR9xC6Vjmfeg

hmm..there is only 333q?

@CiscoHQ did u just pass it on may 12?

my mistake, there is 347 question in vce file.

Passleader released 850q+206q that includes new questions.

Please don’t trust dump. Just study hard. You will pass.

CiscoHQ link does not work..could please repost the link with content..really appreciated..

Which two discovery mechanism does LDP support? (Choose two.)
A. strict
B. extended
C. loose
D. targeted
E. basic

Are D and E the correct answers???…in a test the correct answers are B and E …i think is wrong…

I failed using all the dumps.

LDP uses basic and targeted discovery.

Actually it is trick question. LDP has two types of discovery, basic and extended where the extended LDP discovery send targeted hellos. The strict and loose are related to the types of UPRF.

@ccie2k18 link works , just remove spaces.

Thanks CiscoHQ <3

please donot post wrong. use valid dumps you can pass.
even if you study hard. i think without dumps to pass is tough job.

i purchased it and my friend also pass it on 12 May

shahzad which dump did u use?

any one need the CCIE routing and switching dumps.

email me.: shahzad.khan396 at yahoo . com

i am posting it because i have purchased and its valid. so save time and pass.

any one try shazad dumps recently ?

Guys!! 347Q is the latest! Refer to CiscoHQ link to download!!

@ciscocrazier u can download it from CiscoHQ link.

hi romy congr. l cant open your link can you send to me dump mail address copurkaya at gmail com

Which three security controls would you take into consideration when implementing IoT
capabilities? (Choose three)
A. Implementing Intrusion Detection Systems on IoT devices
B. Change passwords every 90 days
C. Privacy Impact Assessment
D. Define lifecycle controls for IoT devices
E. Layered Security Approach
F. Place security above functionality

Guys tell me correct

Hi Shahzad where did you get your dumps can you send to my email?

C. Privacy Impact Assessment
D. Define lifecycle controls for IoT devices
E. Layered Security Approach

Thanks LouZerr , LDP has basic and extended..thanks for the response

Basic Discovery Mechanism – Using multicast UDP hellos in the case of direct connected neighbors.
Extended Discovery Mechanism – Using targeted UDP hellos in the case of non-directly connected neighbors

Is the 347Q dump enough to pass?

Yey it works!!! Thanks Million….Really appreciated…!

Can someone share me the dumps? Where do I get 347 questions and other dumps?

Nobody has verified if the 347q is valid yet, have they? The sites are still selling 900+q’s

Hello everyone!
I’ve failed my ccie 3 days back,could anyone send me the recent dumps to
adham dot bayzid at gmail dot com

many thanks for your support

Dear
you can trust me. i have purchased dumps and they are valid. one of my friend passed on 12 May. the dumps i have are valid till 22 May.

if anyone need he can email me.

shahzad.khan396 @ yahoo . com

@3days back which dump did u use?

shahzad have verified the 347Q is valid, as above he say his friend passed on 12 may.

Can you please help me about answering that question.
which two statements about igmp filtering are true?
It supports IGMPv3 join messages
By default,an interface can join a maximum of 4 IGMP groups
It support general IGMP gueries
It can be configured on SVIs and on a per-port basis.
Multicast profiles can be configured to filter multicast joins.

if anyone passed the exam, he can email me . i will tell him the best lab solution provider with cheap rates and also he can get 200$ discount on lab fee.

shahzad.khan396 @ yahoo . com

Bulut , I think that the correct answers for igmp filter are…

It can be configured on SVIs and on a per-port basis.
Multicast profiles can be configured to filter multicast joins.

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/25ew/configuration/guide/conf/multi.html#wp1085441

Filter multicast group 239.2.2.2. We’ll need to create an access-list for this:
R1(config)#ip access-list standard LIMIT_IGMP
R1(config-std-nacl)#deny host 239.2.2.2
R1(config-std-nacl)#permit 224.0.0.0 15.255.255.255
The access-list above will deny 239.2.2.2 and permit any other multicast groups. Let’s enable it with the ip igmp access-group command:
R1(config)#interface FastEthernet 0/0
R1(config-if)#ip igmp access-group LIMIT_IGMP

Passleader has updated its dumps to 347q, i guess now the exam has stabilised….but wish to see some people passing before attempting, coz

guys, after delaying it for more than a month, I finally pass it!! 347Q is the way to go, do faster clear it, as now cisco tend to refresh their question very fast!!

This is from one of the guy(CiscoHQ) that shared it, 347Q

https ://mega.nz/ #F!ubRilbJb!9Y_VdeFNYicR9xC6Vjmfeg

just in case someone missed it.

Hello are you sure the answers are correct in 347q ?

Hi Everyone, Anybody here who is on willing to give CCIE lab in upcoming days or a months.
If someone, plz do contact {email not allowed}

m n fayaz @ hotmail . com

Passed yesterday 9xx. 34xq is valid.

@kaka
how many drag and drop did you have?

Did you only study 347q? Is it enough?

AnsShouldBeRest

Can someone please confirm if those 347q are Valid to pass,I have booked my exam for 22 May?

@CCNPHSN I heard about people here the 347q will be valid until May 22 who they know that? I have think about work with that dump and attempt too but im afraid its too much money to spend if something goes wrong! If i was in your shoes i would take the exam before may 22. Can someone please confirme that?