Share your CCIE v5 Written Experience
Please share with us your experience after taking the CCIE v5 Written exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: There are some guys trying to sell workbook, videos or even group buy for CCIE exams in the comment section. Please be careful and double check everything before making your decision. Many of them are scammers and just sell old materials or steal your money.
Hello please somebody help!!!
I need New DUMPs for my CCIE 400-101 exam. can somebody give me download link.
@ CCIE_Expert
please can you share 207q dumps or send to nesa_ie @ hotmail . com
@CCIE_Expert
What vendor is 207Q?
@ CCIE_Expert
please send my dumps to mail bgiorgadze @ gmail . com
@CCIE_Expert
Could you please share the dump 207Q or the vendor: ramy at systech-its.com
Oopss is providing with low cost which he collect to purchase lab solution which is expensive.
He will give lab solution to those who participate in 207q.
I trust him because he provide me 207q without paying him advance.
I would appreciate your input on this; references would be great, but just your reasoning would also help:
Which type of QoS is used on the CE device to rate-limit the aggregate traffic towards the WAN Ethernet circuit?
A. LLQ.
B. FIFO.
C. WRED.
D. CBWFQ.
Refer to the exhibit. After you configured DHCP snooping to block a rogue DHCP server from assigning IP addresses to devices on your network, you notice that all ports on the switch are still trusted. Which action can you take to correct the problem?
A) Disable DHCP snooping on all VLANs.
B) Disable DHCP snooping on VLAN 1 only.
C) Remove the ip dhcp snooping trust command from all interfaces on the switch except the interface that connects to the company DHCP server.
D) Configure the ip dhcp snooping rate limited command to rate-limit the interface that connects to the rogue DHCP server.
Help ME please
@DUMP
C) Remove the ip dhcp snooping trust command from all interfaces on the switch except the interface that connects to the company DHCP server.
I think this is correct answer
@qos
C
I will site for CCIE written exam in two weeks time, can you please share the latest dumps
Orota86 @ hotmail.com
Thank you
Ararb
Just to inform, Abdul9 posted a link which is pointing to indecent video to download .. this must be removed from the forum.
thanks
Ararb
hi
have the ccie R&S written simulator or simlet
????
thankyou
I have cleared my exam, all questions are from that material.. I have used 188 questions…. They people are really sopportive and it worth it…
Thanks for real experience with real users..
Hello CCIE Guys,
Could you share the 188q dump?
Thanks in advance.
Regards,
EJ
eljarzini @ gmail.com
@Usa can you share with me ? txapnia @ gmail . com
@Usa can you send it 188q ? nesa_ie @ hotmail . com
@ CCIE_Expert Amen to your above statements. 🙂
@Usa
@CCIE_Expert
Can you send it 188q ? rbmhon.q @ gmail . com
what is the name of 207Q dump?
please share 188q to rohitpthk1 @ gmail . com
@Save
Can u share the 188Q to saranji90 at gmail dot com
207q is pure two pool questions which is execlty in exam
In 188q you will face 5 to 7 questions from outside while 207q you will face 1 or 2 outside question
188q have 8 wrong answers which is corrected in 207q
@ Anonymous
Could you please share 207q at new2ciscoworld at hot mail dot com
Thank you
passed my ccie .got 900 plus marks.
thank.
zaheerbilal @ yahoo .com
i passed my exam with 217 questions. all answers are correct and i verified by myself.
@zaheer , could you please share dump you used
which two satemet about the host add 10.88.10.10./13 are true ?
A. the network address is 10.64.0.0
B. the network address is 10.88.100.0
C. the network address is 10.88.0.0
D. the broadcast address is 10.95.255.255
E. the broadcast address is 10.88.255.255
F.the broadcast address is 10.64.255.255
the material answer is C&D but my answer is A&D >>>>please guys confirm the correct answer
CD
Dont use spot0 for written. Lab is good but written is not
Hi Zaheer, Anonymous
Could you please share dump 207q to cesarchavez80 @ gmail .com
Thanks
Hi please dont use s p o t (zero) for written.
please share 207Q file to {email not allowed}
please share 207Q file to spajack100 @ gmail.com
Please share latest dump
For the question “between which router would an LDP session be established”, what would be the answer? Image shows three routers, R1 has ldp router-ID set. R2 and R3 appear to have same config… Help?
Which three configuration settings must match for switches to be in the same mst region?
A password
B region name
C Vlan-to-instance assignment
D revision number
E vlan names
F Domain name
i have passed the exam from Prem Dev questions. he gave me 217 . all questions came from his dumps except 2.
if any one need email me.
zaman_zaman111 @ yahoo. com
any feedback about the exam?
Please send it on ag99Xx at gmail dot com
Passed written with 954 using 207q
One new question regarding IoT but simple
Thanks all for support
Refer to the exhibit. How can you configure R6 so that traffic returns to subnet 172.16.6.0/24 via R5?
A) Advertise prefix 172.16.6.0/24 to neighbor R5 with metric 80
B) Configure the neighbor 10.5.6.5 send-community standard command.
C) Set the local preference for all prefixes received from neighbor R5 to 200
D) Advertise prefix 172.16.6.0/24 to neighbor R5 with AS 65006 prepended.
@ Raj
please can you share 207q nesa_ie @ hotmail . com
please can you share 207q h.ipmen88 @ gmail . com
does 207q even exist?
@ask QJ
B) Configure the neighbor 10.5.6.5 send-community standard command.
I think this is correct answer
which feature can implement to most effectively protect customer traffic in a rate-limited WAN ethernet service ?
A) HCBWFQ
B) IntServ with RSVP
C) the ipsec VTI qos pre-classify command
D) Q-in-Q
@ Anonymous
the matrial answer is
Advertise prefix 172.16.6.0/24 to neighbor R5 with AS 65006 prepended