Home > Lab Challenge 5 – Switch Config

Lab Challenge 5 – Switch Config

December 9th, 2014 in Lab Challenge Go to comments

Let’s continue with Lab Challenge 5 with same topology as other lab challenges!

Here is the link to access this lab: http://www.rstut.com/final_flash/Four_Switches_Lab_5/Four_Switches_Lab_5.html.

Comments (14) Comments
  1. Sensie
    December 13th, 2014

    hi Future CCIE,

    here is what i configure:
    1. switchport mode access
    2. switchport access vlan 20
    a. switchport port-security
    b. switchport port-security maximum 10
    c. switchport port-security mac-address 000f.abab.abab
    b. switchport port-security violation shutdown

    4. switchport port-security aging time 5
    switchport port-security aging type inactivity

    5. errdisable recovery interval 600
    …………. what else you want here ? i try cause and didn’t get accepted.

    6. spanning-tree vlan 20 root primary
    7. spanning-tree vlan 20 port-priority 64

    Good Luck Everyone

  2. Marcelo Serrano
    December 13th, 2014


    The tests did match ok to:

    5. (9)errdisable recovery cause psecure-violation
    (10)errdisable recovery interval 600

    and to the iten 7, we can put any multiple 16 lower than 128, for example: 112,96,80,64,48,32,16 and 0

    7. (12) spanning-tree vlan 20 port-priority 112

    good luck

  3. sparta
    December 13th, 2014

    errdisable recovery interval 600
    errdisable recovery cause psecure-violation

  4. NB
    January 4th, 2015

    Have completed all the provided labs and feeling more confident then earlier..Thanks a lot!!!

  5. Mostafa
    January 14th, 2015

    spanning-tree port-priority

    Use the spanning-tree port-priority interface configuration command to configure an interface priority. If a loop occurs, spanning tree can find the interface to put in the forwarding state. Use the no form of this command to return to the default setting.

    spanning-tree [vlan vlan-id] port-priority priority

    no spanning-tree [vlan vlan-id] port-priority

    Syntax Description

    vlan vlan-id

    (Optional) VLAN range associated with a spanning-tree instance. You can specify a single VLAN identified by VLAN ID number, a range of VLANs separated by a hyphen, or a series of VLANs separated by a comma. The range is 1 to 4094.


    Number from 0 to 240, in increments of 16. Valid values are 0, 16, 32, 48, 64, 80, 96, 112, 128, 144, 160, 176, 192, 208, 224, and 240. All other values are rejected. The lower the number, the higher the priority.

  6. me@here.com
    February 25th, 2015

    this was the win I needed to get me RE-motivated in the MIDDLE of a 2 week study-binge.

    This is THE most helpful study format: the fact that ? works….but doesn’t give the cow away and makes you THINK it through and WORK for it the way you would when stumped in a real exam is great.

    I only wish the coder could sum all 7 examples together and gen a RANDOM single question out of the pool : the private-vlan questions would be WAY harder…if they weren’t ALL LINED UP TOGETHER.

  7. AC
    April 22nd, 2015

    only one didn’t make sense to me at the time was Q4
    switchport port-security aging time 5
    switchport port-security aging type inactivity

    good lab

  8. Gwen07
    July 24th, 2015

    Way to go @rstut.True learning now taking place here!

  9. BEN
    October 4th, 2015

    a) errdisable recovery cause psecure-violation
    2) errdisable recovery interval 600

  10. Nauticalmiles
    February 17th, 2016

    1. switchport mode access
    2. switchport access vlan 20
    3. switchport port-security
    4. switchport port-security maximum 10
    5. switchport port-security mac-address 000f.abab.abab
    6. switchport port-security violation shutdown
    7. switchport port-security aging time 5
    8. switchport port-security aging type inactivity
    9. errdisable recovery cause psecure-violation
    10. errdisable recovery interval 600
    11. spanning-tree vlan 20 root primary
    12. spanning-tree vlan 20 port-priority 16

    Thank you for a good lab, rstut!

  11. cisco
    February 23rd, 2016

    thanx all

  12. binary bit boy
    August 10th, 2017


  13. ipkth
    December 17th, 2018

    The 300-135 and 400-101 subjects are now stable, the latest update, and the people who passed the two days passed. Proshosts.com

  14. Raymond
    June 22nd, 2019


    Hi guys

    I went to the exam yesterday and it was successful!

    Q1: Layer 2(2 point):
    PC101 should successfully access Server 1 behind SW1.
    PC101 cannot access R7/R8, fix the problem so that PC101 can access server1, R7 R8

    Q2: PPP(2 point)
    R17 should have one default route which points to R12 via PPP and R11 should have access via telnet to R17 as shown below.

    Q3: OSPF(2 point)
    When R1 tries to access the network, which is between R21 and R22, the traffic should be load balanced as shown in the exhibit.

    Cisco will change in 2020, the guys who want to take the exam should hurry.

    So go to the exam as soon as possible!

    Good luck!

    I used the dump of the PH to pass the exam.
    at PH dooooooooot com

Add a Comment

Reload Image